Removal and Installation Special Tool(s) | 310-069 Wrench, Fuel Tank Sender Unit | Removal WARNING:Refer to: Petrol Fuel System Health and Safety Precautions (100-00 General Information, Description and Operation). NOTE:Removal steps in this procedure may contain installation details. All vehicles | -
Remove the fuel tank. Refer to: Fuel Tank (310-01, Removal and Installation). | Vehicles with fuel fired booster heater | -
Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures). | All vehicles | -
Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures). | | -
CAUTION:Take extra care not to damage the fuel tank level sensor float and arm. | Installation All vehicles | -
CAUTION:Take extra care not to damage the fuel tank level sensor float and arm. NOTE:Make sure that the seal is correctly located. NOTE:Make sure that the installation marks are aligned. | Vehicles with fuel fired booster heater | -
Using a suitable tool remove the fuel fired heater fuel supply line cone spigot. | | -
Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures). | All vehicles | -
To install, reverse the removal procedure. | |