ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

303-01A Engine - 2.0L Duratec-HE (MI4)|Description and Operation > < Steering Column Lock Module
Engine - 2.0L Duratec-HE (MI4) - Specifications S-MAX/Galaxy 2006.5 (03/2006-)

Engine data

Description
Engine code AOWA
Firing order 1-3-4-2
Emission standard Stage IV
Bore 87.5 mm
Stroke 83.1 mm
Cubic capacity 1998 cm³
Compression ratio 10.8 : 1
Power output at 6000 rpm 107 kW (145 PS)
Maximum torque at 4500 rpm 185 Nm
Maximum engine speed (for a short period) 6675 rev/min
Maximum engine speed (continuous) 6450 rev/min
Idle speed 700 ± 50 rpm
Number of crankshaft main bearings 5
Camshaft drive Timing chain
Oil consumption 0.5 l/1000 Km

Engine oil

Viscosity/ambient temperature Type Specification
Recommended engine oil
SAE 5W-30 / below -20°C to over +40°C Ford Formula E WSS-M2C913-B
Alternative engine oils (for topping up only)
SAE 10W-40 / -20°C below -20°C to over +40°C Ford Formula XR+ ACEA A3/B3
SAE 5W-40 / below -20°C to over +40°C Ford Formula S/SD ACEA A3/B3

Capacities

Litres
Initial fill including oil filter 4.6
Service fill including oil filter 4.3
Service fill without oil filter 3.9

Lubricants, Sealants and Adhesives

Specifications
Sealant, oil pan contact surface to crankshaft rear seal retainer, oil pan to cylinder block, oil pan to front cover, engine front cover to cylinder block/ oil pan WSE-M4G323-A4
Oil pressure switch and engine front cover blanking plug sealant WSK-M2G349-A7

Valve Clearances

Description
Valve clearance (engine cold) - intake valves 0,22 - 0,28
Valve clearance (engine cold) - exhaust valves 0,27 - 0,33

303-01A Engine - 2.0L Duratec-HE (MI4)|Description and Operation > < Steering Column Lock Module