Removal and Installation Special Tool(s) | 308-204 Aligner, Clutch Disc | Removal | -
Remove the transmission. Refer to: Getriebe - 2.5L Duratec-ST (VI5) (308-03, Removal). | | -
Slacken the bolts of the clutch pressure plate each two turns at a time in the sequence shown. | Installation | -
Follow the indicated sequence and tighten the bolts of the clutch pressure plate each two turns at a time until the specified tightening torque is achieved. Torque: 23 Nm | | -
Install the transmission. Refer to: Getriebe - 2.5L Duratec-ST (VI5) (308-03, Installation). | | |