Removal and Installation Removal CAUTION:Gearshift cables must not be kinked or bent. NOTE:Removal steps in this procedure may contain installation details. Vehicles with electronic parking brake (EPB) | -
Refer to: Floor Console - VIN Plate Body Style Code: M, Vehicles With: Electronic Parking Brake (501-12 Instrument Panel and Console, Removal and Installation). Refer to: Floor Console - VIN Plate Body Style Code: S, Vehicles With: Electronic Parking Brake (501-12 Instrument Panel and Console, Removal and Installation). | Vehicles with manual parking brake | -
Refer to: Floor Console Upper Section - Vehicles With: Manually Adjusted Parking Brake/Center Armrest (501-12 Instrument Panel and Console, Removal and Installation). Refer to: Floor Console Upper Section - Vehicles With: Manually Adjusted Parking Brake, Vehicles Without: Center Armrest (501-12 Instrument Panel and Console, Removal and Installation). | All vehicles Installation | -
To install, reverse removal procedure | | -
Refer to: Gearshift Cable Adjustment - Vehicles With: 6-Speed Manual Transmission (MMT6) (308-00 Manual Transmission/Transaxle and Clutch - General Information, General Procedures). Refer to: Gearshift Cable Adjustment - Vehicles With: 6-Speed Manual Transmission (M66) (308-00 Manual Transmission/Transaxle and Clutch - General Information, General Procedures). | |