ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Brake Disc > < Brake Pads

Transit.Tourneo Connect 2002.5 (06.2002-)

Front Disc Brake - Brake Caliper Transit/Tourneo Connect 2002.5 (06/2002-)
Removal and Installation

General Equipment
Brake hose clamp
Materials
Name
Specification
High temperature grease
ESE-M12A4-A 

Removal

CAUTION:
CAUTION:If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.
  1. Remove the wheel and tire. For additional information, refer to Section  204-04 Wheels and Tires.

  1. Remove the brake caliper retaining clip.

  1. Loosen the brake hose to brake caliper union.
    1. Using a suitable brake hose clamp, clamp the brake hose.
    1. Loosen the union.

  1. Detach the brake caliper from the brake caliper anchor plate.
    1. Remove the bolt covers (if equipped).
    1. Remove the retaining bolts.

  1. Remove the outer brake pad.

  1. Remove the inner brake pad.

  1. CAUTION:
    CAUTION:Cap the brake hose to prevent fluid loss or dirt ingress.
    Disconnect the brake hose from the caliper.
    • Rotate the caliper counterclockwise.
  1. Remove the brake caliper.

Installation

  1. To install, reverse the removal procedure.
  1. Bleed the brake system. For additional information, refer to Section  206-00 Brake System - General Information.

Brake Disc > < Brake Pads