ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Battery Tray > < Battery Disconnect and Connect
Battery, Mounting and Cables - Battery Transit/Tourneo Connect 2002.5 (06/2002-)
Removal and Installation

  1. Disconnect the battery ground cable.
    For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

2. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Battery positive terminal cover
2
-
Battery positive terminal clamp
3
-
Battery hold down clamp retaining bolt
4
-
Battery hold down strap
5
-
Battery hold down clamp

3. To install, reverse the removal procedure.

CAUTION:
CAUTION:If installing a new battery, only install the specified battery type.
For additional information, refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

Installation Details

Item 6 : Battery

CAUTION:
CAUTION:Make sure the battery is positioned as close as possible to the left-hand side front fender within the battery tray.

Battery Tray > < Battery Disconnect and Connect