ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Ignition Switch > < Steering Column Switches

Transit 2000.5 (01.2000-05.2006)

Steering Column Switches - Steering Column Multifunction Switch Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

  1. Remove the steering column upper shroud.
    1. Using a thin bladed screwdriver, release the two clips (one each side).
    1. Remove the shroud.

  1. Remove the steering column lower shroud.

  1. Disconnect the windshield wiper/washer switch electrical connector.

  1. Disconnect the turn signal switch electrical connector.

  1. Remove the steering column multifunction switch.
    1. Depress the locking tangs.
    1. Lift the switch upwards.

Installation

  1. To install, reverse the removal procedure.

Ignition Switch > < Steering Column Switches