ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Cooling Fan Motor and Shroud - 2.4L Duratorq-Di (Puma) Diesel-2.4L Duratorq-TDCi (Puma) Diesel, Vehicles With: Air Conditioning > < Radiator - 2.0L Duratorq-Di (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.0L Duratorq-TDDi (Puma) Diesel

Transit 2000.5 (01.2000-05.2006)

Engine Cooling - Cooling Fan Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Special Tool(s)

Flange Holding Wrench, Universal

205-072 (15-030A)

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

  1. Slide open the bolt cover.

  1. Remove the accessory drive belt shield retaining bolts.

  1. Detach the fuel charging wiring harness and remove the accessory drive belt shield.

  1. NOTE:
    NOTE:The cooling fan retaining nut has a right-hand thread.
    Using the special tool, remove the cooling fan.

Installation
  1. To install, reverse the removal procedure.

Cooling Fan Motor and Shroud - 2.4L Duratorq-Di (Puma) Diesel-2.4L Duratorq-TDCi (Puma) Diesel, Vehicles With: Air Conditioning > < Radiator - 2.0L Duratorq-Di (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.0L Duratorq-TDDi (Puma) Diesel