ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Disassembly and Assembly > < Auxiliary Heater Core

Transit 2000.5 (01.2000-05.2006)

Auxiliary Heating - Auxiliary Heater Core Housing Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Special Tool(s)

Remover/Installer, Cooling Hose Clamp

303-397 (24-003)

Removal

All Vehicles
  1. Drain the cooling system. For additional information, refer to Section  303-03 Engine Cooling.
Vehicles with air conditioning
  1. Drain the air conditioning system. For additional information, refer to Section  412-00 Climate Control System - General Information.
  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Disconnect the refrigerant lines from the evaporator core.
  1. Lower the vehicle.
All Vehicles
  1. Remove the loadspace trim panel.

  1. Disconnect the electrical connectors.

  1. Detach the auxiliary heater core housing.
    • Disconnect the duct.

  1. Disconnect the heater control valve electrical connector.

  1. Using the special tool, disconnect the heater hoses from the auxiliary heater core housing.

Installation

  1. To install, reverse the removal procedure.

Disassembly and Assembly > < Auxiliary Heater Core