ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Refrigeration Clutch and Clutch Field Coil > < Refrigeration Control Module

Transit 2000.5 (01.2000-05.2006)

Refrigeration - Stationary Refrigeration Non-Return Valve Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Removal

WARNING:
WARNING:The stationary refrigeration system must not be connected to the 230-volt circuit during repair work. Failure to observe this instruction can lead to injury.
  1. Evacuate the refrigeration system. For additional information, refer to Section  412-00 Climate Control System - General Information.
  1. Push the driver's seat forwards as far as possible.

  1. CAUTION:
    CAUTION:Seal off the refrigerant lines and the stationary refrigeration non-return valve to prevent dirt ingress.
    Remove the stationary refrigeration non-return valve.
    • Discard the O-rings.

Installation

WARNING:
WARNING:The stationary refrigeration system must not be connected to the 230-volt circuit during repair work. Failure to observe this instruction can lead to injury.
  1. NOTE:
    NOTE:Install new refrigerant line O-rings.
    NOTE:
    NOTE:Coat the O-rings for the refrigerant lines with clean refrigerant oil prior to installation.
    Install the components in the reverse order.

Refrigeration Clutch and Clutch Field Coil > < Refrigeration Control Module