ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Jump Start Point to Starter Motor Solenoid Cable - 2.3L DOHC-16V > < Battery to Jump Start Point Cable

Transit 2000.5 (01.2000-05.2006)

Battery, Mounting and Cables - Jump Start Point to Starter Motor Solenoid Cable—2.0L Duratorq-Di (Puma) Diesel/2.0L Duratorq-TDCi (Puma) Diesel/2.0L Duratorq-TDDi (Puma) Diesel Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

  1. Remove the jump start point cover.

  1. Disconnect the jump start point to starter motor solenoid cable from the jump start point.

  1. Disconnect the starter motor ground cable.

  1. Disconnect the engine ground cable from the side member.

  1. Detach the jump start point to starter motor solenoid cable from the retaining clip.

  1. Remove the jump start point to starter motor solenoid cable.

Installation

  1. To install, reverse the removal procedure.

Jump Start Point to Starter Motor Solenoid Cable - 2.3L DOHC-16V > < Battery to Jump Start Point Cable