ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Power Steering Pump - 2.3L Duratec-HE (MI4) > < Power Steering Pump - 2.4L Duratorq-TDCi (Puma) Diesel-3.2L Duratorq-TDCi (Puma) Diesel

Transit 2006.5 (04.2006-)

Power Steering - Power Steering Pump—2.2L Duratorq-TDCi (Puma) Diesel Transit 2006.5 (04/2006-)
Removal and Installation

Special Tool(s)
211-188
Expander, Teflon Seal
General Equipment
Flat-bladed screwdriver

Removal

  1. Remove the power steering pump belt.
    Refer to: Power Steering Pump Belt - 2.2L Duratorq-TDCi (Puma) Diesel (303-05 Accessory Drive, Removal and Installation).

  1. WARNING:
    WARNING:Be prepared to collect escaping fluids.
    CAUTION:
    CAUTION:Make sure that all openings are sealed.

  1. WARNING:
    WARNING:Be prepared to collect escaping fluids.
    CAUTION:
    CAUTION:Make sure that all openings are sealed.

  1. Loosen the coolant pump drive shaft nut 1/4 of a turn.
    General Equipment: Flat-bladed screwdriver

  1. Support the coolant pump.

Installation
  1.  
    1. Do not fully tighten the coolant pump drive shaft nut at this stage.
    1. Torque: 23 Nm

  1. Torque: 23 Nm

  1. General Equipment: Flat-bladed screwdriver
    Torque: 22 Nm

  1. Special Tool(s): 211-188

  1.  
    1. Torque: 24 Nm
    1. Torque: 23 Nm

  1. Install the power steering pump belt.
    Refer to: Power Steering Pump Belt - 2.2L Duratorq-TDCi (Puma) Diesel (303-05 Accessory Drive, Removal and Installation).
  1. Fill the power steering system.
    Refer to: Power Steering System Filling (211-00 Steering System - General Information, General Procedures).
  1. Bleed the power steering system.
    Refer to: Power Steering System Bleeding (211-00 Steering System - General Information, General Procedures).

Power Steering Pump - 2.3L Duratec-HE (MI4) > < Power Steering Pump - 2.4L Duratorq-TDCi (Puma) Diesel-3.2L Duratorq-TDCi (Puma) Diesel