ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Power Steering Pump - 2.2L Duratorq-TDCi (Puma) Diesel > < Power Steering

Transit 2006.5 (04.2006-)

Power Steering - Power Steering Pump—2.4L Duratorq-TDCi (Puma) Diesel/3.2L Duratorq-TDCi (Puma) Diesel Transit 2006.5 (04/2006-)
Removal and Installation

Special Tool(s)

Expander, Teflon Seal

211-188 (13-015)
General Equipment
Syringe

Removal

  1. Remove the accessory drive belt. For additional information, refer to Section  303-05 Accessory Drive.

  1. Using a suitable syringe, remove the fluid from the power steering fluid reservoir.

  1. Disconnect the power steering line from the power steering pump.
    1. Remove the bolt.
    1. Disconnect the union.
    • Allow the fluid to drain into a suitable container.
    • Discard the O-ring seal.

  1. Disconnect the power steering hose from the power steering pump.
    • Allow the fluid to drain into a suitable container.

  1. Remove the power steering pump.

Installation
  1. Using the special tool, install a new O-ring seal onto the steering gear to power steering pump union.
    1. Push the new O-ring seal onto the special tool.
    1. Locate the special tool onto the union and install the O-ring seal.

  1. Install the power steering pump.

  1. Connect the power steering hose to the power steering pump.

  1. Install the power steering line to the power steering pump.
    1. Connect the union.
    1. Install the bolt.
  1. Install the accessory drive belt. For additional information, refer to Section  303-05 Accessory Drive.
  1. Fill and bleed the power steering system. For additional information, refer to Section  211-00 Steering System - General Information.

Power Steering Pump - 2.2L Duratorq-TDCi (Puma) Diesel > < Power Steering