ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Diagnosis and Testing|Removal and Installation|Disassembly > < Diagnosis and Testing|Removal and Installation|Removal

Transit 2006.5 (04.2006-)

Engine - 3.2L Duratorq-TDCi (Puma) Diesel - Engine Accessories Transit 2006.5 (04/2006-)

Removal

Special Tool(s)
303-122
Lifting Bracket, Engine

303-435
Mounting Stand

303-435-06
Mounting Bracket for 303-435

303-435-11B
Mounting Plate for 303-435-06

303-680
Socket, Cylinder Head Temperature Sensor

  1. Install the Special Tool(s): 303-122

  1. Install the Special Tool(s): 303-435-11B

  1. Install the Special Tool(s): 303-435-06, 303-435

  1. Remove the Special Tool(s): 303-122

  1. Special Tool(s): 303-680

  1. CAUTION:
    CAUTION:Make sure that the fuel line remains in contact at both ends until both unions nuts have been unscrewed and the area around the joints thoroughly cleaned.
    CAUTION:
    CAUTION:Make sure that the high-pressure fuel supply line remains in contact with both the fuel pump and the fuel rail until both unions have been detached and cleaned.
    CAUTION:
    CAUTION:Make sure that all openings are sealed. Use new blanking caps.
    Vacuum foreign material from the high-pressure fuel supply line, the fuel pump and the fuel rail.
    Refer to: Fuel Injection Component Cleaning (303-04D Fuel Charging and Controls - 3.2L Duratorq-TDCi (Puma) Diesel, General Procedures).

  1. NOTE:
    NOTE:Do not loosen the bolts more than 2 turns.

  1. NOTE:
    NOTE:Do not loosen the bolts more than 2 turns.

Diagnosis and Testing|Removal and Installation|Disassembly > < Diagnosis and Testing|Removal and Installation|Removal