General Procedures Special Tool(s) | Aligner, Gearshift Lever 308-650 | All vehicles | -
Remove the gearshift console cover. | | -
Release the selector cable adjuster. | Vehicles with 5-speed manual transmission | -
Using the special tool, lock the gear lever in 3rd/4th gear position. | | -
Shift the lever into 4th gear. | Vehicles with 6-speed manual transmission | -
Using the special tool, lock the gear lever in 1st/2nd gear position. | | -
Shift the lever into 2nd gear. | All vehicles | -
Raise and support the vehicle. For additional information, refer to: Jacking (100-02 Jacking and Lifting, Description and Operation) / Lifting (100-02 Jacking and Lifting, Description and Operation). | Vehicles with 5-speed manual transmission | -
Ensure that 4th gear is engaged in the transmission. | Vehicles with 6-speed manual transmission | -
Ensure that 2ndgear is engaged in the transmission. | All vehicles | -
Lock the selector cable adjuster. | | -
Install the gearshift console cover. | |