| Description and Operation The adjustable driver and passenger seat are pedestal mounted. The seats are equipped (depending on the seat specification) with fore and aft track movement, cushion tilt and height adjust and manually inflatable lumbar support. A release handle under the front of the seat operates the fore and aft movement. Cushion tilt and height adjust are operated by two release levers mounted on the outboard trim panel. A manual pump mounted on the outboard side of the seat backrest operates the lumbar support. The seat backrest has a headrestraint integrated into the standard backrest frame. The optional seat backrest has a height adjustable headrestraint and an armrest. The adjustable driver and passenger seat have optional heated backrest and cushion. The heated seat switch is located on the front of the seat pedestal. The single fixed passenger seat has an integrated headrestraint. The seat has a two-position floor mounting; the forward position is utilized on vans and kombis and depends on which full rear panel is fitted, the rearward position is used on all other variants. The double passenger seat (depending on vehicle specification) can have either the integral or height adjustable headrestraints. On vehicles equipped with a passenger air bag the seat has an integral three-point lap and diagonal safety belt. The double passenger seat has a two-position floor mounting. The Chassis Double Cab rear seat has a single fixed position and the seat backrest has adjustable headrestraints. All third row and certain second row Kombi rear seats are detachable. The seat locking claws are released by cable operated by a rear mounted release handle. Detachable seats are equipped with spring loaded rollers which raise the seat when the locking claws are released. The Kombi second row seat has a split backrest. The third row seat has a folding backrest which is locked in position by two latches. Kombi rear seats are equipped with integral three-point lap and diagonal safety belts. | 
