Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Sliding Door Lock Cylinder >
< Front Door Lock Cylinder
Transit 2006.5 (04.2006-)
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-14 Handles, Locks, Latches and Entry Systems / Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Rear Door Lock Cylinder - Van-Kombi-Bus
Handles, Locks, Latches and Entry Systems - Rear Door Lock Cylinder—Van/Kombi/Bus
Transit 2006.5 (04/2006-)
Removal and Installation
General Equipment
2.5 mm drill bit
Removal
Remove the rear door trim panel. For additional information, refer to Section
501-05 Interior Trim and Ornamentation
.
NOTE:
Do not touch the adhesive surface as re-bonding will be impaired.
Detach the watershield from the rear door panel.
Remove the rear door lock cylinder retaining clip.
Insert the key into the rear door lock cylinder and rotate it clockwise.
Insert a 2.5 mm drill bit into the hole in the rear door latch to release the rear door lock cylinder.
Rotate the rear door lock cylinder counterclockwise.
Remove the rear door lock cylinder.
Installation
To install, reverse the removal procedure.
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-14 Handles, Locks, Latches and Entry Systems / Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Rear Door Lock Cylinder - Van-Kombi-Bus
Sliding Door Lock Cylinder >
< Front Door Lock Cylinder