Transit Connect L4-2.0L (2010)
2. Install the shutter pin and spring into the shutter housing.
3. Install the shutter over the spring and down into the housing.
8. Apply a small amount of the multi-purpose grease on the fuel door keyway plate where it contacts the shutter assembly.
9. NOTE: The smooth side of the keyway plate faces outwards.
While pushing down on the shutter, install the keyway plate onto the fuel door lock cylinder body.
10. Using a suitable tool (such as a chisel), crimp the fuel door lock cylinder body to secure the keyway plate in place.
11. Stick the water seal to the face of the keyway plate.
12. Install the fuel door lock cylinder lock lever and circlip.
13. Spray a small amount of the multi-purpose grease into the key hole.