Canyon 2WD L4-2.9L (2008)
Acceleration/Deceleration Sensor: Service and Repair
Longitudinal Accelerometer Replacement
Removal Procedure
1. Remove the left split bench or bucket seat. Refer to Front Seat Replacement - Bucket (See: Body and Frame/Seats/Service and Repair/Front Seat
Replacement - Bucket) or Split Bench Seat Replacement (See: Body and Frame/Seats/Service and Repair/Split Bench Seat Replacement) .
2. Access the sensor through service slit provided in the carpet.
3. Remove the electrical connector from the sensor.
4. Remove the 2 nuts retaining the sensor to the floor panel.
5. Remove the sensor from the vehicle.
Installation Procedure