Canyon 4WD V8-5.3L (2009)
Shifter A/T: Service and Repair
Shift Lever Replacement
Removal Procedure
Warning: Refer to SIR Warning (See: Restraint Systems/Service Precautions/SIR Warning).
1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair).
2. Disengage the shift lever seal (2) from the steering column trim covers (1) and slide it up the shift lever (4).
3. Remove the shift lever bolt (3) from the shift lever (4).
4. Remove the shift lever with the shift lever seal from the steering column.
5. Transfer any parts as needed.
Installation Procedure
1. Install the shift lever with the shift lever seal to the steering column.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the shift lever bolt (3).
Tighten the bolt to 20 Nm (15 lb ft).
3. Align and secure the shift lever seal (2) to the steering column trim covers (1).
4. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
