Canyon 4WD V8-5.3L (2009)
Flex Plate: Service and Repair
Automatic Transmission Flex Plate Replacement
Automatic Transmission Flex Plate Replacement
Removal Procedure
1. Remove the automatic transmission. Refer to Transmission Replacement (4WD 2.9L and 3.7L) (See: Automatic Transmission/Transaxle/Service
and Repair/Removal and Replacement)Transmission Replacement (4WD 5.3L) (See: Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement)Transmission Replacement (2WD 5.3L) (See: Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement)Transmission Replacement (2WD 2.9L and 3.7L) (See: Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement) for the 4L60-E.
Important: Note the position and direction of the engine flywheel before removal.
2. Remove the flywheel bolts.
3. Remove the flywheel.
4. Install two M11x1.5 mm bolts (1) to the threaded holes of the spacer, if applicable.
5. Rotate the bolts clockwise to remove the spacer.
