Accord V6-3.0L Hybrid (2005)
Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Glass Outer Weatherstrip Replacement
Special Tools Required
KTC trim tool set SOJATP2014*
*Available through the American Honda Tool and Equipment Program.
NOTE:
-
Once you remove the door glass outer weatherstrip, replace it with a new one because it will bend.
-
Put on gloves to protect your hands.
-
Take care not to scratch the door.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove the door panel.
2. Remove the screw from the front edge of the door.
3. Starting at the front, pull the door glass outer weatherstrip (A) up at each portion where the inner molding (B) catches the inside edge of the
window slot.