Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
_mfi/Page-601003.png)
4. Check that the intake mid rocker arm moves independently of the primary and secondary intake rocker arms.
5. Check the intake mid rocker arm of each cylinder at TDC.
^
If the intake mid rocker arm does not move, remove the mid, primary and secondary intake rocker arms as an assembly, and check that the
pistons in the mid and primary rocker arms move smoothly.
^
If any rocker arm needs replacing, replace the primary, mid, and secondary rocker arms as an assembly.
Inspection Using Special Tools
CAUTION:
^
Before using the Valve Inspection Tool, make sure that the air pressure gauge on the air compressor indicates over 400 kPa (57 psi).
^
Inspect the valve clearance before rocker arm inspection.
^
Cover the timing belt with a shop towel to protect the belt.
^
Check the intake primary rocker arm of each cylinder at TDC.
1. Remove the cylinder head cover.
2. Plug the relief hole with the special tool.
