Civic L4-1.8L CNG (2008)
4. Place a floor jack under the trailing arm to support it.
NOTE: Do not place the jack against the plate section of the lower arm. Be careful not to damage any suspension components,
5. Remove the upper arm mounting bolt (A), and disconnect the upper arm (B) from the knuckle.
6. Remove the rear knuckle upper bracket (C).
7. Mark the cam positions of the adjusting bolt W and the adjusting cam plate (B), then remove the self locking nut (C), the adjusting cam plate, and
the adjusting bolt. Discard the self-locking nut.
8. Remove the flange bolt (D), and remove the knuckle.