Odyssey L4-2.2L SOHC (1995)
6. Remove the four Torx bolts from the SRS unit, then pull out the SRS unit from the driver's side.
CAUTION:
-
Be sure to install the SRS wiring so that it is not pinched or interfering with other car parts.
-
When tightening the Torx bolts to the specified torque after replacement, be careful to turn them in so that their heads rest squarely
on the brackets.
7. Stick the SRS unit cover onto the upper surface of the new SRS unit, and install the new SRS unit.
