Sonata V6-3.0L (1991)
14.
Remove the oil feed hose from the radiator bottom tank and from the rigid line under the battery tray.
15.
Replace the oil feed hose with the new red marked one (300 mm) for use with the 2.4L engine. Use the new spring clamps.
NOTE:
For the SONATA V6, the new red marked oil feed hose should be cut to 215 mm at the white mark.
16.
Check to see that all of the newly installed hoses are securely attached and that all hoses are a safe distance from the exhaust manifold.
17.
Install the headlight assembly, RH combination lamp and radiator grille assembly.
18.
Check the automatic transaxle fluid level.
19.
Before closing the hood, place a punch mark over the last character on the identification plate VIN. This will show that the oil cooler hoses have
been changed.
Service Procedure 1992 Sonatas
System Exploded View
