Tucson AWD L4-2.4L (2010)
C. Install the oil pan (A).
Uniformly tighten the bolts in several passes.
Tightening torque :
M9 (B) : 30.4 - 34.3N.m (3.1 - 3.5kgf.m, 22.4 - 25.3lb-ft)
M6 (C) : 9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)
D. After assembly, wait at least 30 minutes before filling the engine with oil.
12. Install the cylinder head cover.
A. The hardened sealant located on the upper area between timing chain cover and cylinder head should be removed before assembling cylinder
head cover.
B. After applying sealant (Loctite 5900H), it should be assembled within 5 minutes.
Bead width :2.5mm(0.1in.)
C. Running the engine or performing a pressure test should not be performed within 30 minutes of assembly.
D. Install the cylinder head cover bolts in the following sequence.
Tightening torque :
Step 1 : 3.9 - 5.9N.m (0.4 - 0.6kgf.m, 2.9 - 4.3lb-ft)
Step 2 : 7.8 - 9.8N.m (0.8 - 1.0kgf.m, 5.8 - 7.2lb-ft)
CAUTION:
Do not reuse cylinder head cover gasket.
13. Install the breather hose (A).