Tucson AWD L4-2.4L (2010)
Repair Procedures
Replacement
1. Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2. Remove the rear wheel and tire (A) from rear hub.
Tightening torque :
88.2 - 07.8 N.m(9.0 - 11.0 Kgf.m , 65.0 - 79.5 lb.ft)
CAUTION:
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
3. Remove the brake caliper mounting bolts , and then place the brake caliper assembly (B) with wire.
Tightening torque :
78.4 - 98.0N.m(8.0 - 10.0Kgf.m, 57.8 - 72.3lb.ft)
