hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Removal and Replacement|Page 4913 > < Removal and Replacement|Page 4911
Page 9
background image

8. Remove the wheel speed sensor (A), from the knuckle.

Tightening torque :
6.8 - 10.8N.m(0.7 - 1.1Kgf.m, 5.1 - 7.9lb.ft)

9. Remove the assist arm (A) from the rear axle carrier.

Tightening torque :
137.2 - 156.9N.m(14.0 - 16.0Kgf.m, 101.2 - 115.7 lb.ft)

10. Remove the trailing arm (B) from the rear axle carrier.

Tightening torque :
34.3 - 53.9N.m(3.5 - 5.5Kgf.m, 25.3 - 39.7lb.ft)

11. Remove the upper arm (A) from the rear axle carrier.

Tightening torque :
98.0 - 117.6N.m(10.0 - 12.0Kgf.m, 72.3 - 86.7lb.ft)

Removal and Replacement|Page 4913 > < Removal and Replacement|Page 4911