VehiCROSS 4WD V6-3.5L (1999)
Boot of Constant Velocity Joint
Check the boot (2) for crack, damage and grease leak, and the boot band (1) for loosening and damage. Check the both sides of the joint and make
sure that there is no leak of grease from the cover press-in parts (3).
Front Axle Flange Run-out
1. Set a dial gage at right angle near the outer circumference of the flange face and check the run-out of the flange face.
Limit: 0.15 mm (0.006 inch)
2. Set a dial gage at right angle near the inner circumference and check the run-out of the flange.
Limit: 0.15 mm (0.006 inch)
