Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-210002.png)
6. Tighten bleed nipple, see torque settings below.
Front caliper bleed nipple: 4 - 6 Nm.
Rear caliper bleed nipple: 8 - 11 Nm.
7. Following the procedure below, bleed the brakes in the order shown:
Left-Hand Front.
Right-Hand Front.
Left- Hand Rear.
Right-Hand Rear.
8. CAUTION: Remove brake fluid spillage immediately from paint work with clean water.
Fill fluid reservoir.
