XK (X150) V8-4.2L (2008)
Windshield Washer Pump: Service and Repair
Windshield Washer Pump (84.10.21)
Removal
1. Raise and support the vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Remove the RH fender splash shield.
3. Drain the washer reservoir fluid.
-
Position a container to collect the fluid.
4. Remove the windshield washer pump.
-
Disconnect the washer jet hose.
-
Disconnect the electrical connector.
5. Remove and discard the seal.
Installation
1. Install a new seal.
2. Install the windshield washer pump.
-
Connect and secure the electrical connector.
-
Connect the washer jet hose.
3. Install the fender splash shield.
4. Refill the washer reservoir.