XK (X150) V8-4.2L (2008)
9. Release the electrical connector.
-
Remove the 2 Torx screws.
-
Carefully tie the harness aside.
10. Remove the engine control module (ECM).
-
Remove the 3 bolts.
-
Release and disconnect the 2 engine harness electrical connectors.
NOTE: RH illustration shown, LH is similar
11. Release the wiring harness.
-
Remove the ground nut.
-
Release the grommet.
-
Carefully tie the harness aside.
12. Release the brake booster vacuum hose.
-
Release the grommet.
-
Tie the hose assembly aside for access.