Commander 2WD V6-3.7L VIN K (2006)
Shifter A/T: Service and Repair
MECHANISM-SHIFT
REMOVAL
1. Remove any necessary console parts for access to shift lever assembly and shifter cables.
2. If necessary, remove the bolts holding the shield, covering the gearshift and park lock cables, to the shifter assembly and remove the shield.
3. Shift transmission into PARK.
4. Disconnect the transmission shift cable (3) at shift lever (1).
5. Remove the shift cable retainer (4) from the notch in the shifter assembly.
6. Verify the key is in the LOCK position and disconnect the park lock cable (5) from the shifter mechanism cam and the notch in the shifter
assembly.
7. Disengage all wiring connectors (2, 3) from the shifter assembly (1).
