Compass 2WD L4-2.0L VIN 0 (2007)
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
3. Remove the nut (4) and bolt (3) securing the upper control arm (1) to the trailing link.
4. Remove the bolt (2) securing the upper control arm (1) to the crossmember.
5. Remove the upper control arm (1).
Upper Control Arm - Installation
INSTALLATION
1. Position the upper control arm (1) and install the bolt (2) securing the arm to the crossmember. Do not tighten at this time.
2. Install the bolt (3) and nut (4) securing the upper control arm (1) to the trailing link. Do not tighten at this time.
