Grand Cherokee 4WD V6-3.0L DSL Turbo VIN M (2007)
23. Install cylinder head cover. See: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover - Installation
24. Install engine cover. See: Service and Repair/Removal and Replacement/Engine Cover - Installation
25. Connect negative battery cable.
26. Start engine and inspect for leaks. Care must be taken to observe the fuel system warnings.
Tensioning and Slide Rail
TENSIONING AND SLIDE RAIL
NOTE: Carefully clean all mating surfaces with appropriate solvents to assure that no grease or oil is present during reassembly.
1. Install the right side upper timing chain guide and bolt (1).
2. Install the upper timing chain guide pin in the right cylinder head.
3. Install the left side upper timing chain guide and bolt.
4. Install the upper timing chain guide pin in the left cylinder head.
