Liberty 2WD V6-3.7L (2008)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley - Removal
GAS
CAUTION: Do not reuse the old power steering pump pulley it is not intended for reuse. A new pulley must be installed if removed.
1. Remove air cleaner housing See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Filter
Element/Service and Repair/Removal.
2. Remove the washer/coolant reservoir assembly.
3. Remove the fan shroud.
4. Remove power steering belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Removal and Replacement/Accessory Drive Belt - Removal
5. Remove the pulley (2) from the pump using (OTC(R) 7185) power steering pulley removal tool or equivalent (3).
