Sportage 4WD 2Dr L4-2.0L (2002)
Fig. 14 Blower Motor & Fan Removal
11. Install the blower motor vent tubing.
12. Install the blower motor resistor.
13. Insert two screws to hold the blower motor resistor in place.
Tighten the two screws to 62 lb-in (7 N.m).
14. Attach the blower motor resistor connector to the resistor assembly.
15. Position the A/C relay in place.
16. Insert two screws to hold the A/C relay in place.
Tighten the two screws to 62 lb-in (7 N.m).
17. Attach the connector to the A/C relay.
18. Position the A/C cut relay in place.
19. Insert two screws to hold the A/C cut relay in place.
Tighten the two screws to 62 lb-in (7 N.m).