Discovery II
LIGHTING
86-2-4
REPAIRS
Headlamp - up to 03MY
$% 86.40.49
Remove
1. For RH headlamp: Release fixings and
remove battery cover.
2. Remove headlamp access cover from body.
3. Release headlamp from locating sockets.
4. Disconnect multiplugs from headlamp and side
lamp bulbs.
5. Remove headlamp.
NOTE: Do not carry out further dismantling if
component is removed for access only.
6. Remove side lamp bulb holder from headlamp.
7. Remove rubber cover from headlamp.
8. Release headlamp bulb retaining clip and
remove headlamp bulb.
9. Remove 6 screws and remove headlamp
retaining sockets.
Refit
1. Fit retaining sockets to new headlamp and
secure with screws.
2. Fit headlamp bulb and secure with clip.
3. Fit rubber cover.
4. Fit side lamp bulb holder.
5. Position headlamp and connect multiplugs.
6. Fit headlamp onto locating pins.
7. Check headlamp beam alignment.
Headlamps beam alignment - up to 03MY.
8. Fit headlamp access cover.
9. For RH headlamp: Fit battery cover and
secure with fixings.
