Discovery II
MANUAL GEARBOX - R380
OVERHAUL
37-29
13. Using tool LRT-37-022 and LRT-99-002,
remove bearing from 4th gear end of layshaft.
Reassembly
1. Clean layshaft, input shaft and output shaft
bearing surfaces.
2. Using tool LRT-37-022, LRT-37-044 and
LRT-99-002, press new bearing onto splined
end of layshaft.
3. Using tool LRT-37-022 and LRT-99-002,
press new bearing onto 4th gear end of
layshaft.
