Discovery II
MANUAL GEARBOX - R380
OVERHAUL
37-27
OVERHAUL
Shaft - output
$% 37.20.25
Disassembly
1. Remove gearbox selector fork - set
OVERHAUL, Fork - set - selector shaft.
2. Remove gearbox front cover.
3. Remove and discard oil seal and bearing tracks
from front cover.
4. Remove and discard bearing tracks from centre
plate, collect selective shims.
5. Using tool LRT-99-002 and support bars under
1st gear, press output shaft bearing from output
shaft.
6. Remove 1st gear, bearing collar, needle roller
bearing and synchromesh rings.
7. Noting its fitted position, remove 1st / 2nd gear
synchroniser hub, 2nd gear synchromesh
rings, 2nd gear and needle roller bearing.