Discovery II
MANUAL GEARBOX - R380
37-28
OVERHAUL
8. Using tool LRT-99-002 and support bars under
3rd gear and press off output shaft pilot
bearing.
9. Remove spacer, 3rd / 4th gear synchroniser
hub, synchromesh baulk rings, 3rd gear and
needle roller bearing.
10. Remove output shaft.
11. Using tool LRT-37-043 and LRT-99-002,
remove taper roller bearing from input shaft.
12. Using tool LRT-37-044 and LRT-99-002,
remove bearing from splined end of layshaft.