Discovery II
MANUAL GEARBOX - R380
OVERHAUL
37-47
Bearing - output shaft rear support
$% 37.20.55
Disassembly
1. Remove extension housing.
OVERHAUL, Extension - gearbox rear.
2. Using tool LRT-37-001/2, LRT-37-009 and
LRT-37-010, remove output shaft support
bearing track.
3. Remove output shaft rear oil seal.
4. Remove output shaft support bearing and oil
pick-up ring.
Reassembly
1. Clean output shaft and bearing recess in
extension housing.
2. Fit output shaft support bearing and oil pick-up
ring. (Align tag with centre of drain slot).
3. Fit new output shaft oil seal using LRT-37-014.