Discovery II
MANUAL GEARBOX - R380
OVERHAUL
37-51
Lever - gear change
$% 37.16.04
Disassembly
1. Remove gear selector housing.
OVERHAUL, Housing - gear selector
mechanism.
2. Restrain right hand bias spring using a suitable
pair of grips.
3. Remove 2 bolts securing right hand side of bias
spring adjustment plate.
4. Repeat operations for left hand bias spring.
5. Remove bias springs and adjustment plate.
6. Remove lower gear lever.
7. Remove and discard Railko bush.
8. Remove and discard oil seal from housing.