Discovery II
MANUAL GEARBOX - R380
OVERHAUL
37-53
Cover - front
$% 37.12.33.01
Disassembly
1. Remove retaining peg and remove release
bearing.
2. Remove bolt securing clutch release fork,
remove retaining clip and remove clutch
release fork.
3. Remove 2 bolts securing release bearing
sleeve and remove bearing sleeve.
4. Remove 6 bolts securing clutch housing and
remove clutch housing.
5. Remove and discard 6 bolts securing oil seal
housing.
6. Remove oil seal housing.
7. Using a soft metal drift, carefully remove input
shaft front bearing track from housing.
8. Remove oil seal from housing, discard seal.
