Discovery II
TRANSFER BOX - LT230SE
REPAIRS
41-27
19. 03 Model Year onwards - if fitted: Release
and disconnect both differential lock warning
lamp switch multiplugs from main harness.
20. Remove cable tie and multi plug from bracket
on transfer box.
21. Release transfer box breather pipe from
bulkhead clip.
22. Remove 4 bolts from transfer box bottom plate,
position support plate LRT-99-010 to transfer
box and tighten bolts.
23. Position gearbox support jack and secure
support plate to jack using 4 bolts.
24. Remove 3 bolts securing transfer box to
gearbox.
25. Fit 3 guide studs LRT-41-009 through
transfer box bolt holes to support it during
removal.
26. Remove 2 bolts and nut securing transfer box
to gearbox.
CAUTION: If securing stud is removed
during this operation, it must be discarded
and a new stud fitted.
27. Position a jack to support gearbox and engine.
