Discovery II (LT) V8-4.0L (2002)
20.
Disconnect the connector from IACV. (Figure 4)
21.
Release the clip and disconnect the breather hose from the throttle housing. (Figure 4)
22.
Disconnect the connector from throttle position sensor. (Figure 4)
23.
Release the clips and disconnect the two coolant hoses from the throttle housing.
24.
Loosen the outer cable locknuts and the release throttle and cruise control cables from the bracket. (Figure 5)
25.
Release the throttle and cruise control cables from the clips and throttle cams and position aside.