Freelander Service Procedures
REAR SUSPENSION
64-2
REPAIRS
Bearing - hub
$% 64.15.14
Remove
1. Raise rear of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove road wheel.
3. With assistant depressing the brake pedal,
remove and discard drive shaft nut.
4. Remove brake shoe assembly.
BRAKES, REPAIRS, Brake Shoes -
5. Using LRT-70-007 release handbrake cable
from backplate and remove from backplate.
6. Remove clip securing brake hose to bracket on
damper.
7. Disconnect brake pipe union from wheel
cylinder.
CAUTION: Always fit plugs to open
connections to prevent contamination.
8. Release ABS sensor from hub.
9. Remove nut and bolt securing trailing link to
hub.
10. Remove nut, bolt and washers securing
transverse links to hub.
11. Remove 2 nuts and bolts securing hub to
damper.
12. Release damper from hub.
13. Remove hub assembly from drive shaft.
NOTE: Do not carry out further dismantling if
component is removed for access only.
