Range Rover P38
LAND ROVER V8
21
REPAIR
H.T. LEADS
Service repair no - 18.20.11
Remove
1. Remove air intake hose.
See this section.
2. Disconnect 4 h.t. leads from LH cylinder head
spark plugs.
CAUTION: To avoid damage to h.t. leads,
disconnect them by pulling on the rubber
boot, NOT the lead.
3. Release h.t. leads from 8 camshaft cover clips.
4. Disconnect 8 h.t. leads from ignition coils.
5. Disconnect 4 h.t. leads from RH cylinder head
spark plugs.
6. Release h.t. leads from 8 camshaft cover clips.
7. Remove 8 h.t. leads
8. Remove 4 clips securing h.t. leads to each other.
Refit
9. Position h.t. leads and connect to ignition coils.
10. Connect h.t. leads to spark plugs.
11. Engage h.t. leads to camshaft cover clips.
12. Fit clips securing h.t. leads to each other.
