Range Rover P38
LAND ROVER V8
13
REPAIR
MASS AIR FLOW (MAF) SENSOR - up to 99MY
Service repair no - 19.22.25
Remove
1. Disconnect battery negative lead.
2. Loosen hose clip. Release intake hose from
MAF sensor.
3. Disconnect multiplug from MAF sensor.
4. Release 2 clips and remove MAF sensor from air
cleaner.
5. Collect ’O’ ring seal.
Refit
6. Ensure mating faces of air cleaner, MAF sensor
and intake hose are clean.
7. Fit ’O’ ring to MAF sensor.
8. Fit MAF Sensor to air cleaner. Secure with clips.
9. Connect multiplug to MAF sensor.
10. Connect intake hose. Secure with clip.
CAUTION: Failure to connect intake hose
securely will allow unmetered air to enter
the engine, causing running problems.
11. Reconnect battery negative lead.
MASS AIR FLOW (MAF) SENSOR - from 99MY
Service repair no - 19.22.25
Remove
1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.
3. Disconnect multiplug from MAF sensor.
4. Loosen clip screw and release air intake hose
from MAF sensor.
5. Release 2 clips and remove sensor from air
cleaner.
Refit
6. Position sensor to air cleaner and secure clips.
7. Position air intake hose and tighten clip screw.
8. Connect multiplug.
9. Connect battery earth lead.
10. Fit battery cover and secure with fixings.
